There are plenty of displays out there, but almost all of them are designed to showcase objects that have a relatively flat bottom, such as a phone or a tablet and hence will stay put even when it gets slightly perturbed.
However, these types of displays are not suitable for Frisbees, as they can start to roll off the display after minor disturbances. Thus, I designed this simple display where the bottom of the display is slightly curved to prevent that.
Additionally, the front of the display is a prime surface for adding some text to the display, such as I did here for the High-Performance Graphics 2021 (HPG) Frisbee.
I would recommend printing the display on the side, as that gives it the most strength and best appearance in my opinion. Make sure to reinforce the longer edges as they tend to warp rather heavily.
The size of the display is based on the 'Ultrastar' Ultimate Frisbee disc.
The author hasn't provided the model origin yet.