ESP32 Cam TOP Case for Encloser Corner Montage

I changed the Top Case of Michael Fanta to have the ESP Cams as Corner Cams.

ESP32_Cam_Case_Top_Part.stl Original Model

I use two M3 heat inserts to assemble it to the Encloser Corners.

The 02 Version i use for the Front Left Corner

the normal Version for the Left Back Corner

with 2 M3 Screws fixed at the Enlcoser.

you need 2 M3 heatinserts and 2 M3x6 screws

rest check the pictures

Printed with Petg and Like Michael Fantas Cases

https://www.printables.com/model/801363-esp32-camera-case

Mainpart from the ESPCase is this 

ESP32_Cam_Case_Bottom_Part.stl

Thanks to Michael Fanta for this great Case !

I changed and remodel the top of the Case to assemble it at the Corners of the original Encloser for MK4. Added to Heatinserst M3 at it .