WMD Launcher for Metal Fight Beyblades

EDIT: I previously uploaded the wrong starter interface file, it's been fixed

This is a VERY high RPM Metal Fight Beyblade launcher that I designed. It can and will cause irreparable harm to you, your possessions, and anything in a 10ft radius of the stadium.

Parts/tools (these links are affiliate links that earn me a small commission when you buy through them):

• Pull starter: https://amzn.to/4ipZdnN
• M2 screws: https://amzn.to/4ikfUkk
• Washers: https://amzn.to/4i0tolr
• M3 screws: https://amzn.to/4h5LIbJ
• M3 x 4mm heat inserts: https://amzn.to/4h5LVM3
• M3 x 6mm heat inserts (not required, but it makes for a more durable launcher. You also still need the M3 x 4mm inserts as well): https://amzn.to/4klDyih
• Basic soldering iron/heat insert inserter: https://amzn.to/4h66B6v
• Silicone grease: https://amzn.to/4koPoYL
• If you don't have a launcher to steal the hooks from, I'd recommend buying a midfake Beyblade from a site like Beys & Bricks since some of them come with one, and it's almost the same price as buying a launcher alone on Amazon: https://beysandbricks.com/takara-tomy-hell-hades-kerbecs-bd145ds-metal-masters-beyblade-starter-bb-99/
• Cutter: https://amzn.to/4bseTUY 

Printing/slicing recommendations:

• Print all shafts laying flat to prevent breaking them from high torque
• Anything that spins should be printed with a lot of walls and a lot of infill. Ideally no less than 10 walls and 75% infill
• Set the seam position to “random” for all the parts so that they assemble together evenly