
Worked awesome! Having two sides made putting it up so much easier. Thanks!
Had to resize the X and Y a bit to make it fit my pegboard correctly, but these turned out great! Thank you for sharing
Ended up making my own that screw together but these were the inspiration. Thanks
Worked perfectly to hang a sheet of peg board in my garage. The peg parts on the front were barely long enough to go through the board though, didn’t have much sticking through to grab the back part. Solved that with some wood glue on the back of the peg board that held the back pieces on well enough to get the whole thing up on the wall and screwed in.
Similar to Maverick0197, I successfully used these Pegboard Mount Spacers and deck screws to hang pegboard. Easy to print, hang, and much less expensive than buying them. Thanks, Slayernine!
Used these with some #8 deck screws with great success.
I thought the fitment was too tight until I realized that it was necessary to hold the spacers in place while hanging the boards.
I printed a handful in Printed Solid Jessie PLA, going to hang them up soon. Thanks