GameSir Cyclone 2 - Minimalistic Controller Charging Stand

Simply chuck the controller on this stand and it should align itself for charging 99% of the time.

A minimalistic controller stand for the GameSir Cyclone 2. The geometry of the stand should make it easier to align the controller with the charging pins without having to take too much care about placement. With the original stand I personally would often not place the controller correctly such that the pins wouldn't engage.

The modification uses the original POGO pin charging stand without irreversible modifications. Simply unscrew the four screws fixing the charging pad to the metal baseplate. This modification can be reversed at any time if you end up prefering the original stand. The model offers enough space to keep the radio dongle plugged into the USB port of the stand. 

The design prints flat without need for any supports. 10%-15% infill should suffice but you can add more if you want to add weight to the stand.

Feedback welcome! 

If you like the stand, I would appreciate you sharing your makes and giving the model a review. Engagement helps with visibility on the platform.

###

model changelog:

• increased tolerances for the POGO pin stand cutout.
• tilted the base by 15° in order to facilitate better mating of the controller with the POGO pins
• fixed spacing for stand mounting pins (bottom)
• fixed some broken meshes in the model due to conversion
• fixed uneven geometry at the base

###

If you don't need the charging functionality, you can simply use the original stand this model is based on. This way you won't have an unnecessary gap in the structure.

Slight tilt to the overall stand to get it in line with the POGO pin charger. Cutouts to accommodate the charging base.