Monitor Riser

Needed a monitor riser as the desk I have doesn't have a mounting point for monitor arms. Tried to draw inspiration from the Voron honeycomb skirts for the design. Used a 1x10 inch board from Home Depot (link below). I cut the boards at a 15 degree angle so that the 2nd monitor was at a 30 degree angle to me. 

https://www.homedepot.com/p/1-in-x-10-in-x-4-ft-Spruce-Pine-Fir-Common-Board-Actual-Dimensions-0-70-in-x-9-20-in-x-48-in-473440/319661932

Ends do not need screws for assembly. 

Legs are using (4 ea) #8 x 1in interior Wood screws to attach to the bottom of the boards. 2 in the left board, 2 in the right board to hold join together.