Standoff - 1/2" PVC Shaft x 1/2" EMT Clip

This standoff is used to provide separation from your mounting surface to a prop that is supported with ½" EMT Pipe.

The standoff can be used as is to provide 1" of separation or it will fit snug inside 1/2" Schedule 40 PVC pipe that is cut to your custom length.  It is countersunk to accept a #10 or #8 screw.

Note: The shaft will fit inside thin-wall 200 PSI PVC, but it will be loose. These are designed for the thicker walled, 480 PSI Schedule 40 PVC. The outer diameter is the same for thin-walled and Schedule 40, so the clip end of the mount works with both types. 

Dimensions:

• Clip Accepts: ½" EMT Pipe
• Shaft Accepts: ½" Schedule 40 PVC Pipe
• Shaft Length: 1", 2"
• Screw Size: #8 or #10

Print:

• Printed laying on it's side with the clip and shaft touching the plate.
• Printer: Prusa i3 MK3S+
• Resolution: 0.25mm
• Infill: 60%, Gyroid
• Perimeters: 5
• Layers: Top (5), Bottom (5)
• Supports: No
• Filament: PETG (for UV resistance)

Blinky Pixels specializes in high-quality RGB LED smart pixels, pigtails, wire, clips, mounts, flood lights, power supplies, and accessories. Since 2022, we've helped make homes shine with vibrant lighting solutions.

We offer these files for personal use as a contribution to the RGB Lighting Community. We also sell the items on our website at BlinkyPixels.com If you enjoy the designs, please consider us for your holiday lighting gear.