Flagpole top and bottom swivel sets plus caps

Top and bottom swivels sets for use with 1" diameter flagpoles, with three example caps.

Includes Fusion 360 source files (.fd3) and .stl files.

The swivel set pieces are printed twice; once for the top of the flagpole to secure the top of the flag, and once for the middle of the flagpole to secure the bottom of the flag.  The cap simply fits into the swivel set at the top of the flagpole. 

For best results, attach the swivels sets to the flagpole with the bolt facing up at the top of the flag and the bolt facing down at the bottom of the flag.

Suggested printing material is PTEG with a 25% infill.  The swivel sets don't require a brim or supports, supports for the build plate only are suggested for the cap.

Additional hardware needed:

2 x  ¼ inch bolts ½ inch long

2 x  ¼ inch nuts

2 x flag clips