LTT CPU Cases

They are finally here,  CPU cases for your organization needs!

Versions Included:

• 17XX holder V9
• 20XX Holder V5
• 115X 1200 holder V8
• AM4 Holder V11
• AM5 Holder V8

Tools required:

• Hammer

Extra Materials:

• 2 x 2D finishing nail 1" (25mm), or other ~1.75mm Rod

Printing:

• Orientation: Flat sides on the bed
• Works well in PLA and PETg.
• normally use: 0.2mm, 0.25mm or 0.28mm layer height

Assembly:

• Place the upper case so that it nests into the lower case

• the hinge holes should be aligned

• Insert nail/rod (point bit first) into hole
• Tap in nail/rod with hammer till nail is seated
• trim excess if desired

Repeat till all you cases are assembled, then happy organizing!

.STEP and .STL files are provided.