Core One_display_cover_protector_v1_v2_Print NO MMU

Print PetG

0,2mm Structural

3 perimeters

otherwise default prusaslicer MK4s settings

print no MMU

When aligning, it reports a problem with print stability, long bridging, the MK4S printer prints without problems, bridging is fine, see photo.

CORE_print 3 perimeters

ONE_ Print 6 perimeters

The text has a tolerance of 0.15mm, it fits the cover exactly, I had to help a little with the letter ,,P" with a folding knife. The text is fixed with superglue

Test Print

if you use a light filament, the display will beautifully illuminate the text, Prusa Core One, the covering part of the text consists of 3 0.2mm gaps