I made the Ocarina Of Time by: Zuza awhile ago and it came with a stand, but I didn't print it right away because I wasn't sure if I would get into playing it. I started playing it quite a bit and thought it was time to print the stand. I thought it was a little bland, so I added a triforce to zelda-it-up.

I printed it without supports and it did fine, but if your printer is really bad at bridging I would recommend putting supports in the triforce part.

I did a bit of post-processing. Here are the steps of what I did:

I first painted the triforce with golden paint. I did about 5 layers to get the black not showing through.
After that I let the paint dry for a day, then I sanded it down till it was really smooth.
Last but not least, I sprayed it with Rustoleum 2x gloss clear. I did about 3 passes around the hole thing, but I think 2 will work fine.

Print Settings: