Doorstops in 3 sizes with less and more flex

I would print in TPU
2
6
1
20
updated February 11, 2025

Makes

Comments

A great design, but far too large, I plan on scaling it down but I’m worried that the struts will become far to thin.

If there’s a big gap between door and floor it might work

View one more comment

@Laine_1237423 it’s not impossible I’ve messed up. In fact it’s even likely. But I thought I’d gone with the small one

@RobertWillia_1443890 You could check but thank you for letting me know how yours went.

All comments loaded