Camera tripod based polar fine adjustment unit

Camera tripod based polar fine adjustment unit.
Can be used as an telescope mount.

*Some hexagon nuts are made tight to prevent them from slipping off.

In that case, you can easily insert it by placing a hexagon nut in the hole and tightening it with a hexagon bolt.

< Filament >

PLA recommended.

< BOM >

saddle :
    m4 35mm 1ea
    m4 hexagon nut 2ea
    m4 hex socket flat head cap screw 20mm 4ea
    m4 hexagon nut 4ea

top : 
    m4 35mm 6ea
    m4 hexagon nut 6ea

middle :
    5mm x 100mm steel shaft 1ea

    m4 10mm 6ea
    m4 20mm 8ea
    m4 socket set screw 5mm 3ea
    m4 hexagon nut 15ea

    m3 20mm 4ea
    m3 hex socket flat head cap screw 15mm 4ea
    m3 hex socket flat head cap screw 20mm 8ea
    m3 hexagon nut 16ea

    mr105zz 14ea

bottom :
    5mm x 100mm steel shaft 1ea

    m4 12mm 6ea
    m4 25mm 2ea
    m4 socket set screw 5mm 2ea
    m4 hexagon nut 14ea

    m3 socket set screw 4mm 2ea
    m3 hexagon nut 2ea

    mr105zz 2ea

    3/8" to 1/4" conversion nut 1ea

    BB pellets(6mm)

< Other items >

    Instant adhesive

    Hex wrench set (1.5, 2, 2.5, 3 [mm])

    Mini hand drill set (3, 3.2, 4, 4.2 [mm])