MR16 lamp fixture

Special creation for an outdoor vivarium, exposing as little surface as possible for animals to hold on/climp to. Screw holes for surface mounting included, as well as some basic vent holes.

Print in PETG (at least) to accomodate for heat. Round ceramic GU5.3 socket is glued into place (using super glue), if friction mount is not enough. 

As stated above -LED only-

Please be aware that MR16 lamps slightly differ in their dimensions, so this might not fit all lamps. I used Philips LED CorePro 4.4W (9290024946)