Drippy Bucket Divider with Hex Key Holder

This is another divider insert for davidmoneysign's fantastic Drippy Bucket model. It has the same dimensions as his original insert, as well as the inserts designed by SpeakingOfBrad.

This divider features two main sections, plus a cutout section that's shallower (48mm deep) to hold your hex keys/Allen wrenches. I've found it perfect for holding the hex keys that came with my Prusa.

Like the other dividers, this is a tight fit into the original bucket. To insert it, I made sure that it was perfectly aligned as I started to insert it (no tilt to the side, or it would bind). Then I flipped it over and leaned my bodyweight on it to push it all the way in. Once it's in, I'm not sure it'll come out or be rotatable, so get it lined up right the first time!

If you're worried that this won't fit (eg, if your printer's tolerances aren't great), you can scale the model down by 1-2% in the x- and y-dimensions.