Creality K2 plus build plate quick clamp

I print larger prints that take up most of the bed for my business and 1 of my K2 plus's bed magnet was coming up from the print warping a bit. I designed these clamps to assist on holding the bed and print. It works great no warping anymore and they are easy to snap on and are small enough to prevent the hotend from hitting it during mesh level.

I recommend PC or higher temp filament for heat range, I used PC-GF

.2 layer height .6 nozzle 30% infill 

Updated:

2-10-25- Made top shorter so it would not interfere with mesh when whole bed mesh is needed.