Sharkropad - open source macropad

Sharkropad is an open-source hotswappable macropad supporting QMK/VIA.
The project includes the 3d printed parts, a custom pcb and QMK/VIA firmware.

Features:

• USB-C with ESD Protection
• Rotary Encoder
• OLED Display
• Customizable RGB Lighting
• Customizable keymap using VIA
• Hot-Swappable Switches
• Powered by a STM32L432 MCU

Print settings:

• I used a layer height of 0.2mm
• The top case, the encoder knob and the plate were printed in matte black PLA
• The bottom case was printed in transparent PLA
• Supports are needed for the top and the bottom case
• The rotary encoder knob should be printed with at least 3 solid bottom layers
   

Build instructions, scad files, files for the pcb and the firmware can be found here:
https://github.com/mawaeg/Sharkropad