IKEA ALEX Handle 2024

Inspired by the multitude of IKEA Alex handles out there.
This one however has the shape traced based on an outline photo of the actual drawer curve.

Additionally I was looking for a handle that can be pulled on from both top and bottom.

3mf file includes all print settings with eSun PLA+ for a 0.4 nozzle, 15% infill and 40% infill modifiers for sections connecting the handle to the body (most likely they aren't needed, just a precaution).

Fusion f3d file can be edited to remove text or change screw holes for the hardware you have on hand.

Prints upside-down with no supports.

Additional hardware: I used 3.5x35mm wood screws with an 8mm head.

Note: This was created for an IKEA Alex 304.837.99 which was bought around May 2024. I own an additional similar Alex drawer from over 5 years prior - this does not fit.
P.S. It also seems to fit nicely on the wide drawers.