Here is the latest board game insert from StoreAllTheBits, this time for Container 10th Anniversary
This collection of inserts is made to hold all the pieces of the Container 10th Anniversary Edition board game in individual compartments so that nothing shifts around in the box, even when it is stored on its side.
A full set of inserts include:
1 x Card box for storing player, loan, and Investment bank cards (card box is sized to accommodate sleeved cards) The design of these inserts leverages the existing cardboard insert shipped with the game. A few simple modifications performed by hand are necessary in order to have enough space for the inserts. These modifications are simply bending selected sections of the cardboard insert to create the necessary space. Instructions for these modifications, as well as tips on streamlining game setup and tear down, can be viewed on our StoreAllTheBits.com website in the Port of Call Tips and Tricks section.
Lastly, for those who did not originally purchase the extra containers (3 of each of the 5 different colors), I've included a serviceable facsimile of the container. The container model is a fairly simple design as shown and does not have the "door" detail on the original containers. Printing the container in PLA with 100% infill yields a container that is about half the weight of the original containers.
The lettering on the lids is some vinyl lettering I added for flair and the go with the theme.
NOTE: If you don't have access to a 3D printer or would like to support my hobby, I've made this available on my Etsy shop at Store All The Bits.
Printer:
D-Bot
Rafts:
No
Supports:No
Resolution:
0.2mm
Infill:15% to 100% for Container
Filament: Inland PLA
Notes:
The Container model can be printed at 100% infill to maximize the weight.
The horizontal features on the Container may benefit from supports when you print, but they can be difficult to add because they are so small. Category: GamesThe author marked this model as their own original creation. Imported from Thingiverse.