Fuzzy dice

This is a set of dice for the car mirror. It is setup to print so the supports, when removed leave the dice fuzzy and the chain clean. The setup requires the dice stand upright requiring support material on two sides to hold up the dice. Every other link of the chain also requires support. It is a difficult print to set up, but once setup it is easy to print. 

The correct way to set up the print is to bring in one part, and than bring in the rest of the parts using add part in the pull down menu. By doing this you can select each dice and add Fuzzy skin. I would recommend using the paint on function to add a minimal amount of supports.