Worry Stone

This worry stone was my first thing I created from scratch for myself using Fusion 360. It's a simple worry stone created after a few iterations while I learned the tools for the first time. Use this print as you please as it isn't something I feel warrants any sort of attribution for any reason. I've attached the f3d file for anyone who might want to adjust it.

Printed in PLA at 0.3mm layer heights using standard draft settings. Ridges feel quite nice at this layer height. For a more clean print I've turned on variable layer height and aligned seam positions in the 3mf file.

If you're using the stl file please turn it on its side when printing as thumb area should have parallel lines for a more comfortable slide. No supports necessary.