Key Tag with paper / foil insert v2

V2 Update: Enlaged holes, as they didn't fit all situations. For mini version, increased tolerances for paper holder. For me the original one is better, but here it is.

Note: Overhangs are expected to drop a bit, there is a big tolerance for that, so try out one, it will click together.

Quick and easy key tag. Printed text on tag is beautiful, but when you have over 10 locations, paper and pen sounds as better solution.

Key Tag is a small one 40 x 15 mm and paper insert is 30 x 9 mm

Standard Key Tag is normal one with hole for key holders is 50 x 20 mm and paper insert 32 x 16. 

The clip goes over the paper (and optionally clear foil) to keep it in place.

I printed in PLA and it has enough flex to clip in perfectly.

No supports. Designed and printed for 0.2 layer height, but works ok in 0.15.

Perimeters - 2 or 3 (i did 3)

Infill - 20 % Rectilinear for better top finish.

Bottom layers - 3

Top layers - 5