This is a great model, very cute and easy to print. I settled on 4 colors for this one. Printed in PLA - my first print on a new aftermarket plate I just got. Love the shiny finish it gave the top and bottom.
Every Day Dice Carry (EDDC) Box "Pattern"
EDDC box with dice inspired pattern from https://www.instagram.com/thevioletreliquary/.
79
227
3
1040
updated October 8, 2024
Makes
Comments
@Biohazard_824710 that's some sweet pattern. And also a nice idea with the colors. Thanks for sharing.
Great result!
Edit: this is all irrelevant, templates are included, I just didn't actually read the whole description
<strikethrough>I did end up adding EVA foam (not pictured), and to get the shape right I used negative volumes in prusaslicer to cut the model down to just the part of the lid I wanted foam on, then printed that out as a cut template for a craft knife. It worked great, but it was a little work to get the template printed. Are cut templates something you'd consider designing and posting?</strikethrough>
Thanks for the great box! (edited)
View one more comment
@wuerfel ah! I've fallen into one of the classic blunders I see, thanks for clearing that up! I'll edit my earlier comment so I don't confuse others.
I'm planning to make many more of these, so I'll definitely be using those templates. Thanks again!
@muffletup_122530 no problem. Happy printing.
Very nice and clean. Hope you like it.