Side parts for a simple shoe rack. Connected with 10mm square tube.
116
159
0
3745
updated October 15, 2023

Description

PDF

Side parts for a simple shoe rack.

Before you print this model, consider printing my new and improved version of this shoe rack!

You need 10mm square tube with a wall thickness of 1mm. Also 8 screws to fix the aluminum profile. 
Deburr the aluminum profile inside and outside after sawing. Drill holes at the ends through which the screws can later be screwed into the plastic.
After attaching the aluminum profiles, it is advisable to also drill into the plastic with a smaller diameter so that the screws do not break the plastic inside.

If you like check out my other designs too!

Tags



Model origin

The author marked this model as their own original creation.

License