Lego - Batman Plane Remix

Remix of:

Lego - Batman Plane
by RubenKimi February 28, 2019

Added Support Stand as well ask grapling/anchor/hook

Print Settings

Printer:

BIBO

Rafts:

No

No

Resolution:

150 um

23 to 100

Filament: Inland PLA Black

Notes:

The bat shape larger plane and support are printed at 23% fill, the smaller pieces at 100% infill.

Post-Printing

Trim as necessary. Glue together Right and Left sides of support.

If you choose the Glue Together U-Joint. Glue together the u-joint around the ball on the top of the support being careful to only get the glue between the pieces of the u-joint and not the ball itself. I used a rubber band to hold the pieces tightly together while the superglue set up.

If you choose the single piece U-join remove the designed in Support structure before assembling. Some sanding may be necessary to enable the ball to fit into the u-joint.

Snap the support into the base slot and glue in place if you like.

Tie a piece of string around one end of the S-hook and the other end through the loop on the grappling hook/anchor.

Glue seat and guns into plane.

How I Designed This

Remix modifications done in TinkerCAD

Custom Section

Have Fun.