Taz 5 Camera Clamp for Modular Mounting System

This is a remix of https://www.thingiverse.com/thing:2851344 for use on a Lulzbot Taz 5 printer and possibly others. The clamp has been reshaped so that it does not interfere with the glass plate of the heated bed. This is intended to be used with the Modular Mounting System (https://www.thingiverse.com/thing:2194278) or GoPro compatible mounting hardware.

The screw holes are sized for M5 screws and nuts.

Print instructions

Category: 3D Printer Accessories Print Settings

Printer: Modified Taz 5

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 50

Filament: ColorFabb XT PETG light blue
Notes:

Supports were used only on the main body of the clamp.

Depending on the weight of the hardware attached, this may affect the bed leveling of the printer. Leveling should be performed after the camera is mounted.