80mm Fan Stand V-2

Stand/bracket for an 80mm PC fan that can be positioned at three angles. Originally designed for a desktop exhaust fan for soldering. The mounting holes and countersinks were designed for standard pc fan screws, but will take anything that fits into a 5mm bore.

V-2 has ventilation slots added to the wings of the bracket to allow more air flow from the fan exhaust as the original model was stifling the fan when used in its alternate positions. It should be printable without supports if oriented at a 45deg angle (see reference photos) while using a brim at 0.1 and 0.2 layer heights. I have printed it at 0.3 with success, but there were some loose overhangs that needed to be cleaned up for cosmetic purposes.

The original model has been left in the V-1 folder in case anyone wants to remix it from scratch without the added ventilation slots.