@Dave_40140 i think prusa doesnt have an option for this. My gamechanger for stringing with petg was to rise the retraction from 0,8mm to 1,1mm. Maybe you could try this. Also petg have to be very dry to Print without stringing.
@Dave_40140 You have to try. All dimensions are designed for printing with a 0.4 mm nozzle. It is possible that parts of the clip are printed slightly different.
works perfect, but whats the inner outer inner parameter?
@Dave_40140 Hey thanks. Its the print order for the walls. In my case it eliminates PETG-Stringing when printing more than one piece at once.
@Till nice!! yes I got a lot of stringing, but couldnt find those parameters on prusaslicer could you name the comand to search it please
@Dave_40140 i think prusa doesnt have an option for this. My gamechanger for stringing with petg was to rise the retraction from 0,8mm to 1,1mm. Maybe you could try this. Also petg have to be very dry to Print without stringing.
@Till thank you !!
Have you tried scalling them down or up ? Would they hold ? (edited)
@Dave_40140 Not sure what you mean?
@Till sorry the autocorrect text changed my word I meant scalling them down
@Dave_40140 You have to try. All dimensions are designed for printing with a 0.4 mm nozzle. It is possible that parts of the clip are printed slightly different.