Labels for Measuring Spoons

Durable replacement labels for Prepworks by Progressive magnetic measuring spoons.
The default labels are screen printed and fade rapidly with use.

Print settings

Material: PETG
Layer height: 0.20 mm
No supports needed.
Manual color change:
    Printer > General > Extruders > 2
    Printer > Custom G-code > Tool change G-code > M600
    Print settings > Multiple Extruders > Wipe tower > Enable > Off

Materials

• Cyanoacrylate glue

Notes

Carefully remove old labels, making sure to save the built-in magnets (tip: drill out the 6 plastic pins and use a putty knife to pry them off)
Double check magnet polarity and label orientation before securing using a few drops of cyanoacrylate glue on the 6 plastic pins, using clamps or a vise to make sure the labels are fully flush with the spoon body.
Do not use glue on the magnets.