legion go - Dual screen Atachment

Required materials

7 Inch Raspberry Pi Screen 800x480 HDMI Portable Monitor IPS LCD Screen Display for Raspberry Pi

https://www.amazon.com/dp/B09MFNLRQQ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

Anker 332 USB-C Hub (5-in-1) with 4K HDMI Display, 5Gbps - and 2 5Gbps USB-A Data Ports

https://www.amazon.com/dp/B0BQLLB61B?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

a 5 x 16 x 24 screw and a washer and nut - I had to go to lowes for this i recommend you do as well

NOTE this is in American sizing I'm not sure what any other country's equivalent would be or if there is one even needed

thin Velcro straps  might need to try a few options i ended up at a local craft store zip ties would work as well

okay so some notes:

1. this model is print in place
2.  the hinge joint requires a 5 x 16 x 24 screw and a washer and nut
3.  it will fit on a 255 x 255 x 255 bed however it is a very tight fit and requires rearranging 
4. you will need to use JBL weld on the LCD mount to secure the LCD panel not to worry though once its on its very secure even with pliers i couldn't get it off  tested on a broken display
5. this is specifically for the legion go and ayn odin pro 1  and right now i have no other machine to test out and make other versions of this i recommend taking a crack at it yourself

Fused all three pieces and trimmed them down to create a mount for a monitor