Amiga 3000 case for Raspberry Pi 5

Inside mounted step-down 5A inverter and microHDMI > HDMI adapter (Ugreen brand).

The 30x30 fan is enough to cool the CPU if you are only using it for Amiga emulation. 
During full load of all cores it is insufficient and you need to install better cooling.

The LEDs I used are 5x5mm in size. Remember. Always choose the correct resistor values.

On the rear panel a standard switch and a 5.5mm power socket.

The bottom ventilation panel can be removed for easy access to the SD card.
It is mounted on two 2mm diameter cylindrical magnets and two 5x5x2mm square magnets.

I am attaching the Design Spark Mechanical project so that you can customize the design with your own electronic components.
The DSM project includes a STEP model of the raspberry Pi 5, which I am not the author of.