A two color experiment.
The FLEX CUBE 5 x 5
Inspired by the hexcell kinetic fidget by dansqer. prints pretty well and the tolerances should be quite forgiving.
369
3124
6
8259
updated January 23, 2025
Makes
Comments
I love this model. It is sooooooo... fun to play with. Printed really good on Prusa mini+
anker make slicer says 16hrs? that sound about right?? 65X66X63 mm. Seems like a lot.
@blackmikemo_2831986 i printed mine in 5 hrs, at .32, 2 walls, 5% infill.
@ReProps very strange. The files clocks right in the slicer at 13hrs. I failed this print once before so i changed to precision settings. Lol if my printer is advertised at being fast i wonder why....anker make m5....i printed it tho....has 4 hours left and it seems like it will be fine
Yo, someone stole and uploaded your design as their own. You should report this user, he stole my lock pick designs too.
Stolen design link:
 https://www.printables.com/model/1153967-figet-cube/comments
@EON_2632549 every one of that dueds files are stolen i reported them all i hope he gets ban
View one more comment
@sparkythefemb_795614 o shot can u remove the supports or is it trash
@JoshuaDrouin_2852783 I mean if you can remove them and they arnt everywhere then it should be fine and if it moves freely then it doesn’t matter but it should have been printed squares down and without supports for some tips look for makers muse video that says best way to orient your 3d prints 101 2015
Hi do you print it horizontal or vertical?
@MarcVanDerWes_945710 with the small square faces on the buildplate
