Printer Nozzle Charm

Fun Nozzle Charm to let people know you are a Maker!

I printed it in silk gold PLA and printed them on end (see my Make photo). I added a 5mm brim for support and enabled organic supports for the underside of the hex head only. The threads do NOT need supports (and actually make them not print well)! The organic supports are easier to remove than grid supports.

To assemble simply push the Pin into the hole in the Nozzle. There is a taper on the Pin to facilitate the assembly. This is a press fit and glue was not necessary on my prints. If you have issues, slightly scale the Pin up or down in your Slicer program as necessary.

Please post your Likes & Makes if you like the design. Thanks!

Scaled down and added pin.