K2 Plus Exhaust Ultimate Magnetic to 2.5" Hose

Ultimate magnetic exhaust for the k2 plus. You will need 22 20mm x 3mm magnets. The magnets should fit snugly, but I recommend using a little glue to keep them in place. They will protrude a little from the print and I recommend adding some thin mounting tape around the hole to keep a good seal between the printer and the exhaust. This should be printed in a material that can withstand high temps (ABS/ASA) because the back of the printer can get quite hot.

See my other exhaust options and accessories here: https://www.printables.com/model/1067398-k2-plus-exhaust-dual-single-4-25-options