This organizer holds up to 10 gift ribbons with additional drawers for small stuff.
For the lids you need 8 x “Ribbon_organizer - Lid” and 2 x “Ribbon_organizer - Lid_side”. You need to insert filament through the lids and the base to connect them.
You can also glue magnets in the drawers (slots) and on the backside of the base (cutout). It is designed for 10mm x 2mm Magnets.
I used these ones: https://www.amazon.de/dp/B07GSNRY1M?
Print:
Use support for the handle on the drawers.
The author marked this model as their own original creation.