A funny take on the "Safety First" signs you would see in a factory or other workplace. So what's first and second?
1h 38m
1× print file
0.20 mm
0.40 mm
26.00 g
47
121
6
550
updated January 14, 2023

Description

PDF

I got the idea for this from a bumper sticker that said “Safety Third”. I thought I could do better and modeled mine after the UN Class 3 flammable placard.

This can be printed easily without the MMU2 since the color changes occurs at a specific layer. I printed it in PETG, but PLA would work just fine too. On the backside are two circular indentations where you can glue two 7mm x 3.75mm magnets or bolts if you want to mount it to something.

I hope it brings a laugh to your workshop or garage. Posted makes and likes appreciated.

Print Instructions:

Parameters that I used were .2 layer height, 3 perimeters, 15% infill, 5 solid layers top/bottom.

Just add a color change in Prusa Slicer where the print transitions from the red base to the white details.

Tags



Model origin

The author marked this model as their own original creation.

License