Keks Light Meter Adapter for Nikon F

This is a custom adapter to mount a Keks light meters to a Nikon F camera. Nikon F camera don't use the usual cold shoe mounts found in most cameras. There are adapters for Nikon F flash mount to typical cold shoe but it results in an ugly and tall stack up. I wanted an adapter that directly mounts to a Keks light meter.

I have a Keks KM02 which I am using on my Nikon FTN. But this should work for most Nikon F and Keks light meters.

The adapter has a row of mounting holes so you can fine tune the lateral position of the light meter. 

Print Instructions:

• Print orientation matters. Print top side down (left photo) for aesthetics. Print front/back side down (right photo) for optimal strength. 

• Supports recommended
• Layer height: 0.15 - 0.20 mm
• Wall lines: 3
• Infill: 30-40%
• Temperature: follow recommended for material type
• After printing, use screw to ream holes if oblong. Screws should be able to freely rotate in screw holes.