GOEWS Deburring Tool Holder

I printed out a small 3x3 wall plate to try some of the fitment for the GOEWS system. I've invested a bit in the HSW system but so far I absolutely love the GOEWS system because of the way the hooks and tool holders fit in via a cleat system, they fit easily but securely and you're confident that they can be removed again without breakage.  Also directly compatible with Gridfinity!  So I can see turning my HSW into GOEWS right quickly.  

So, first up is my rendition of the AFA Deburring tool holder.  I printed it with 0.2 nozzle, 3 walls and 25% infill.  I did use brim only just because and it printed well. 

FYI - On the wall segments just in my observations, they do print best standing up with tree supports.  However, I made my top of model to trees support on this sample 3x3 0.1 which is way too close.  Therefore it was a nightmare removing the supports.  I also find purple PLA to be much more rugged with support to model and model to textured PEI plate adhesion anyway for some reason.