Awesome Build Plate Storage

I have limited workspace for my 3D printing so I designed and made a storage rack so that they are neatly stores AND convenient to access. Although there's only 3 slots, you can put multiple sheets in each slot.

The .3mf file I'm including for the large, XL version is set to print with a 0.6mm nozzle. II printed it that way to save print time. To print with a 0.4mm nozzle, simply change the appropriate settings after opening the .3mf file in your slicer.

the “Anti-Warp” objects on either end of the rack on the build plate are there to assist with lift / warp prevention. If you think you don't need the, simply delete them in the slice otherwise remove after printing; they easily pull off.

There are FOUR VERSIONS: 

“Build Plate Storage” for build plates 250mm X 250mm (Perfect for Prusa, Bambu, Elegoo) or smaller. This can be printed on a 250mm X 210mm (MK2 / 3 / 4, etc. printers) or larger. Print the rack and the feet then glue the feet to the rack per the orientation of the labels of each foot. There are a couple of small supports that are easy to remove. Unless the rack would be exposed to direct sunlight / heat, PLA is sufficient for this.

This has two sub-versions: One to print feet separately for smaller printers and one with feet attached too print on larger printers. Print the rack and the feet then glue the feet to the rack per the orientation of the labels of each foot. 

“XL Plate Storage” - that bolts to the bottom and back side fame extrusions of the printer with M3nE nuts or the like (see pictures). The other a freestanding version. For Prusa XLs with all spool holders on one side of the printer OR any CoreXY with exposed frame extrusions. There are several supports that should come out fairly easily.

This model in all it's formats - digital files, physical prints, etc. are strictly for personal use only. 

This model is free for all my Printables Club members. Physical prints may only be sold by members of my Tier 2 Printables Club.

 Follow me on:
www.instagram.com/ozzy_artist/
Printables.com
www.facebook.com/profile.php?id=100082036420297
Twitter: @Ozzy_The_Artist

Thanks :o )