well i love the design but it could have come with the holes for the screws by the module and the clams are very weak even at 100% infill with petg so make sure to make everything good to not have to open it again. thats what could be improved but otherwise as said i love the design and will use it when my module arrives
@Y0SH1zzzz_1012228 Thanks for the feedback! The holes should be there. I messed up the final adjustments and the holes disappeared. I've just fixed them and re-uploaded the model. It is strange to hear that the latches are weak with petg because I printed mine with ABS and I opened and closed the case many times and nothing broke. Usually petg has the better layer adhesion than abs. I've added step files if anyone wants to tweak it.
well i love the design but it could have come with the holes for the screws by the module and the clams are very weak even at 100% infill with petg so make sure to make everything good to not have to open it again. thats what could be improved but otherwise as said i love the design and will use it when my module arrives
ill update after that probably (edited)
@Y0SH1zzzz_1012228 Thanks for the feedback!
The holes should be there. I messed up the final adjustments and the holes disappeared. I've just fixed them and re-uploaded the model.
It is strange to hear that the latches are weak with petg because I printed mine with ABS and I opened and closed the case many times and nothing broke. Usually petg has the better layer adhesion than abs.
I've added step files if anyone wants to tweak it.