Christmas Bells | Christmas Ornaments

Print Instructions & Recommendations:

• No support or any other post processing is needed.
• Models can be printed with 1 or 2 Walls and 0% Infill. It is recommended to use 2 Walls for stability and quality aspects. 
• Unless you are printing with a 0.10mm layer height, it is highly recommended to use variable layer height for optimal quality on top of the bells.
• The models are designed as solids, meaning the inside is filled by default. To save material and printing time, it is recommended to use above settings. Alternatively, you can choose an infill percentage of your liking to adjust weight and stability based on your display preferences.
• About tea light compatible versions:
  • Tea light bases are inside the bell models. Please do not worry if it is not visible in the preview. 
  • Base comes in two versions where the extended one was designed only to show the lampshade. 
  • Both .stl files for the bases can be found inside the folders.

• 3MF files prepared in PrusaSlicer are also included.

Assembly Instructions:

• Insert a tea light candle with a diameter of ≤38mm into the base, align the base with the bottom of the bell, and turn it to secure it in place. That is it!

Model Information:

• Dimensions (X-Y-Z) | Bell: 83~87 x 83~87 x 88.8 mm
• Dimensions (X-Y-Z) | Tea Light Base Diameter: 39 mm
• Commercial Use: Detailed terms and conditions for commercial licensing are available on Patreon.
• Commercial Use: Terms and conditions are available on Patreon.

Have you checked out Christmas Trees?