Quest 3S Robot Mount

Overview

This mount was designed to securely attach a Quest 3S headset to any vehicle, object, or robot. It was specifically designed for FIRST Robotics. 

Print Settings

• Tree Supports
• Build Plate Only
• 15% infill
• Prints best at 0.2mm layer height, although I've been successful printing at up to 0.42mm layer height
• Print with the flat plate towards your build plate
• Only tested with PLA, but should work with other materials

Assembly Details

NOTE: This model is designed to be a tight fit! When fitting the print onto a headset the first time, try to gently coax the edges of the headset into place. The seams should line up and the headset should slip into place. Subsequent donning/doffings should be easier. 

This model was designed to enable easy donning and doffing of the Quest 3S while maintaining a rigid connection to the robot/vehicle. I also included a short wall behind the headset that includes zip tie holes to safely attach a USB-Ethernet adapter. 

The model works best when thin (1/8" or 3/16") bungee cord (link) is used to hold the headset in place. A channel on the bottom of the mount keeps the bungee cord in place when the headset is removed. Three 10-32 bolts secure the mount to your robot.