Simagic HPR NEO Mount for HE Sprint Pedals

This is a simple and easy to print adapter to solidly mount your HPR Neo haptic devices to your Heusinkveld Sprint pedals.

These print and work well using PLA. I also printed using ABS.

100% Infill is recommended. 50% infill works fine too.

Minimum of 3 walls is recommended.

Required hardware:

M4 x 25mm Countersunk screw - 1 per pedal needed. 

Mounting:

Remove the pedal face. The pedals come with the Torx driver to remove these.

Insert the M4 x25mm screw back through the pedal face, adding the mount from behind the pedal. Then add the black Simagic metal bracket & secure with the original nut.

Then mount the HPR per the supplied instructions.