TV06 Modified R2.1 Rear and Side Skirts

Rear skirts:

Requires 4x M4x8 socket head screws and 4x M4 T nuts to mount to extrusions.

Use auto supports for the cantilevered bit, avoid ABS/ASA as it may warp at that section.

Side skirts:

Requires 12x M3x8 socket head screws and 12x M3 T nuts to mount to extrusions.

To create the hexagonal pattern, use the Skirtmod.stl file to create a modifier in Orcaslicer (in the recessed section) using the following settings:

Sparse infill line width: 0.42mm

Top shell layers: 0

Bottom shell layers: 0

Alternate extra wall: Yes

Sparse infill density: 22%

Sparse infill pattern: Honeycomb

Sparse infill direction: 60 degrees

Ensure vertical shell thickness: None

.3mf file uploaded for convenience too if you don't want to do the above.

The resulting slice should look like this:

Retained R2.1 extrusion mountings but modified the section with interfaces with the feet to be compatible with R1.x feet.