📢 Beware of SCAM! If you get a suspicious Messenger message with a link, don’t open it or reply!

Ender 3 V3 SE 5020 Fan for K1 hotend

A mount for a 5020 part cooling fan with the longer K1/KE hotend.

368

updated November 29, 2024

Description

Only use with 5020 fans that do not have a “full" exhaust taking up the side!

This is a lengthened version of the original 5020 shroud for those that use a K1/KE hotend.

Requires

2 M3x~8-12mm Pan Head or Countersunk screws.
2 M4x~20-30mm Pan Head for mounting the fans (can potentially use shorter screws if mounted in reverse?)

You may have some difficulties since I've only tested this out on my printer.

The author remixed this model.

Adjusted the model height to compensate for the longer K1 hotend.