Ho scaricato più volte i file,ma quando voglio stampare, c'è sempre quella cosa in mezzo alla scatola fra una cerniera e l'altra non capisco perché. Sapete aiutarmi?
@Fedefox0305_2929626 Thank you for your comment! Could you provide more details about the slicer you’re using and the printer you have? That way, we can better understand the issue and help you solve it. 😊
@Fedefox0305_2929626 It’s likely that creality cloud doesn’t fully support 3mf files, which is why it’s placing all the separate objects at the center. I recommend opening the file on a computer and setting it up using PrusaSlicer, Cura, or OrcaSlicer, then sending it to print either from your computer or via its dedicated storage. Let me know if you need any help!
Ho scaricato più volte i file,ma quando voglio stampare, c'è sempre quella cosa in mezzo alla scatola fra una cerniera e l'altra non capisco perché. Sapete aiutarmi?
@Fedefox0305_2929626
Thank you for your comment!
Could you provide more details about the slicer you’re using and the printer you have? That way, we can better understand the issue and help you solve it. 😊
@3DKIMBA i have creality ender 3v3 ke and i use creality cloud by phone...thanks!
@Fedefox0305_2929626 It’s likely that creality cloud doesn’t fully support 3mf files, which is why it’s placing all the separate objects at the center. I recommend opening the file on a computer and setting it up using PrusaSlicer, Cura, or OrcaSlicer, then sending it to print either from your computer or via its dedicated storage. Let me know if you need any help!
@3DKIMBA on cura its perfect!now i try. Thanks!