Aeon Trespass Odyssey - Cycle 4 Endless Staircase Entrance

I designed a model for the Endless Staircase which will be shared later, and I thought it would also be nice to have a replacement for this entrance token:

Made it as close as I could with my very limited modeling skills…

Edit 14.12.2024: Added a new version - turns out even though you can enter the Endless Staircase when you move to this space, you can also stand there as an elevated space. So… added a new version with a base on the top to stand a Titan on! Better print that one! Also made base thicker (it was a bit weak on the original). Use Entrance v2.3mf.

This did not print well on my first try as my support detached. I designed a second version with a part that will attach better to supports and then needs to be removed with pliers. 

So find two versions:

• One with the teeth quite small, which need to be supported.
• One with name ‘support’, adding a small part below the teeth. Here you attach your supports, which should be more stable - and then the teeth will need to be detached from the small extra part. Just cut here:

This was printed on a Prusa XL with 0.4n at 0.20 layer height. Should print perfect on MKx with MMU.

Not for sale, as I will offer it on my Etsy store.

Please like and share your makes, and check my other ATO designs here: Aeon Trespass Odyssey Collection by JuanV | Printables.com