Lantern for LED Candels

This ia a housing for a LED candle with a diamater of 75.5mm with a variable height.

The height dependes on the length of the struts (Stütze).

I added 2 holes for magnets to hold the socket (Sockel & Boden) in place. The holes have a diameter of 3.5mm.

My print settings:

Nozzle: 0.6mm

Profile: 0.6mm speed with IS and 0.32 layer height

Infill: 5% gyroid

Support: yes (for the top section labeled as Deckel) by build plate only snug

The Struts (Stütze) must be printed 6 times.

All parts are glued together.

Last but not least, glue the ring onto the Top (Deckel) 

Ive included my Fusion 360 File, so feel free to remix.

Happy printing.