Torch light

Support me & Join Printables Club

The lamp consists of several parts. 

The printed parts are Flame, Stick, Holder, and Nut. Flame and Stick consist of several parts that need to be glued together. For the pixelization effect, it is necessary to print the individual parts from different shades of the filament (pauses for changing the filament are already included in G-CODEs). 

Flame and Stick is connected with 8 pieces cylinder shape neodymium magnets (5mm diameter and 3mm height). Magnets have to be glued into holes.

The holder can be attached to the wall with either two screws or double-sided adhesive tape.

A one-piece version of the Flame and Stick parts is also included.

The LED bulb is inserted in the IKEA STRÅLA Cord set.