I made a video showing how I fit it into the CRT.
I had a 1084s monitor with a faulty switch and it was hard to find an original. While searching for alternatives I found the Canal PDS-1 and if it was flipped onto it's back the connections can be soldered to the board. I designed this mount for the switch to sit on and the mount can be screwed to the PCB with some of the holes from the original switch.
I printed in PETG for strength with 5 perimeters 5 top and bottom layers and 30% infill.
Printer Brand:
Creality
Printer:
CR-20
Rafts:No
Supports:
No
Resolution:200
Infill:
30
The author marked this model as their own original creation. Imported from Thingiverse.